When handling the timing gear, first remove the nut fixing the gear. How to get it can use the following 6 methods. Let's talk about camshaft wholesale, camshaft manufacturers and camshaft brand companies.
①Place the camshaft and gear plate on a clean ground, place a suitable steel rod on the back of the timing gear or on the top of the front end of the shaft, and hit the steel rod with a hammer. Sometimes the timing gear can be removed with a few hammers.
② Put the camshaft upside down and the gears are flushed down, place a steel rod or copper rod at the root of the gears, and knock down gently with a hammer.
③Place the camshaft gear on the tripod (traction frame) of the trailer or on the large jaw of the bench, punch down the camshaft, and hit the camshaft moderately downward with a hand hammer.
④If the bakelite gear is damaged and only the gear seat cover is left, you can use: electric welding cutting; cutting and pulling with a hacksaw, and the seat cover can be taken out by expanding it.
⑤ Use a suitable tensioner to pull out the gear. This method is also suitable for use in the car.
⑥Put the camshaft vertically in the press, pad the gears, and press the camshaft downward.
